產品特性:
◆SF 380C 吸附式單瓦楞機，瓦楞輥Φ380mm。上、下瓦楞輥采用優質鉻鉬合金鋼，硬度在HRC58°-60°表面經研磨。
◆糊輪自動空轉裝置，氣壓移動漿盤，電動隔漿調整裝置，配有芯紙電動噴霧裝置。
◆壓力輥與下瓦楞輥、上糊輯與下瓦楞輥均以氣動控制、上糊輥與控糊輥之間的間隙由電機微調。
◆上糊量和控糊量的間隙由位移器控制，并有人機界面顯示數值，電動微調上糊量的大小，確保瓦楞機在高、低速運轉時所需要的上糊量,確保單瓦楞紙（貝坑紙）質量的穩定性。
◆上漿輥及控漿鯤設計為成組導軌滑移拆裝，瓦楞輥與兩端軸承座可成組吊裝更換，縮短維修時間。
◆變頻電機主傳動，獨立驅動箱，三軸傳動，由變頻器控制瓦楞機的加減速，達到節能（電）更為日后生產管理留下通訊接口。
Product features:
◆SF 380C adsorption type single corrugator, corrugating roller Φ380mm.The upper and lower corrugated rollers are made of high-quality chromium-molybdenum alloy steel, and the surface hardness is ground at HRC58°-60°.
◆The paste wheel automatic idling device, the air pressure movable pulp plate, the electric slurry adjustment device, and the core paper electric spray device.
◆The pressure roller and the lower corrugated roller, the upper and lower corrugated rollers are all pneumatically controlled, and the gap between the upper and lower corrugated rollers is fine-tuned by the motor.
◆The gap between the paste volume and the control paste volume is controlled by the displacement device, and the man-machine interface displays the value, and the size of the paste volume is adjusted electrically to ensure the paste volume required when the corrugator is running at high and low speeds, and to ensure a single corrugated paper ( Beikeng paper) the stability of the quality.
◆The sizing roller and the sizing-control kun are designed as a group of guide rails for sliding disassembly and assembly, and the corrugated roller and the bearing seats at both ends can be hoisted and replaced in groups to shorten the maintenance time.
◆Inverter motor main drive, independent drive box, three-axis drive, the acceleration and deceleration of the corrugator is controlled by the frequency converter, which achieves energy saving (electricity) and leaves a communication interface for future production management.
