技術參數:
◆機械速度:150/180m/min
◆瓦楞輥:320/360mm
◆有效幅寬為:1400mm-2500mm
◆熱源為蒸氣
Technical parameters:
◆Mechanical speed: 150/180m/min
◆Corrugated roller: 320/360mm
◆Effective width: 1400mm-2500mm
◆The heat source is steam
產品特性:
◆SF320/360吸附式單式瓦楞機,瓦楞輥Φ320/360mm,上、下瓦楞輥采用采用優質鉻鉬合金鋼,硬度在HRC58°-60°表面經研磨。
◆糊輪自動空轉裝置,氣壓移動漿盤,電動隔漿調整裝置,配有芯紙電動噴霧裝置。
◆壓力輥與下瓦楞輥、上糊輥與下瓦楞輥均以氣動控制、上糊輥與控糊輥之間的間隙由電機微調。
◆上糊量和控糊量的間隙田位移器控制,開有人機界面顯示數值,電動微調上糊量的大小,確保瓦楞機在高、低速運轉時所需要的上糊量,確保單瓦楞紙(貝坑紙)質量的穩定性。
◆上漿輥及控漿輥設計為成組導軌滑移拆裝,瓦楞輥與兩端軸承座可成組吊裝更換,縮短維修時間。
◆變頻電機主傳動,獨立驅動箱,三軸傳動,由變頻器控制瓦楞機的加減速,達到節能(電)更為日后生產管理留下通訊接口。
Product features:
◆SF320/360 adsorption type single corrugating machine, corrugating roller Φ320/360mm, upper and lower corrugating rollers are made of high-quality chromium-molybdenum alloy steel, and the hardness is HRC58°-60° and the surface is ground.
◆The paste wheel automatic idling device, the air pressure movable pulp plate, the electric slurry adjustment device, and the core paper electric spray device.
◆The pressure roller and the lower corrugated roller, the upper and lower corrugated rollers are all pneumatically controlled, and the gap between the upper and lower corrugated rollers is fine-tuned by the motor.
◆The gap field displacement control of the paste amount and the control paste amount, open the man-machine interface to display the value, and electrically fine-tune the size of the paste volume to ensure the paste volume required when the corrugator is running at high and low speeds, and to ensure a single corrugated paper ( Beikeng paper) the stability of the quality.
◆The sizing roller and the sizing roller are designed as a group of guide rails to slide and disassemble, and the corrugated roller and the bearing seats at both ends can be hoisted and replaced in groups to shorten the maintenance time.
◆Inverter motor main drive, independent drive box, three-axis drive, the acceleration and deceleration of the corrugator is controlled by the frequency converter, which achieves energy saving (electricity) and leaves a communication interface for future production management.