◆Design speed: 80m/min
◆Effective width: 1400mm-2200mm
◆Corrugated roller: Φ280mm
◆Driving reduction box adopts oil-immersion lubrication to reduce noise, universal joint transmission, and isolate power source.
◆The lifting and lowering of the upper tile roller, pressure roller and rubber coating roller are all pneumatically controlled.
◆The paper guiding method adopts vacuum adsorption and air volume adjustment device to maintain the stability of the corrugated shape at high speed.
◆The corrugated and pressure roller bearings are lubricated with high temperature resistant grease.
◆Gluing department adopts automatic recycling glue supply.
◆The upper and lower corrugated rollers are made of 48CrMo high-quality alloy steel, after heat treatment, the hardness of the surface is ground at HRC58°-60°.
◆The surface of the rubber roller is treated with anilox engraving and chrome plating.
◆Manual or electric glue isolating device.
◆The gluing part can be operated independently or not independently when stopped, and the main motor is controlled by frequency conversion (optional).