◆SF320S設計速度：100m/min
◆有效幅寬：1400mm-2200mm
◆楞輥：Φ320mm/360mm
◆驅動減速箱采用浸油潤滑，減小噪音，萬向節傳動,隔離動力源(選裝)。
◆上瓦輥、壓力輥、涂膠輥升降，均以氣動控制。
◆導紙方式采用真空吸附,帶風量調節裝置,保持高速狀態小瓦楞楞型的穩定。
◆瓦輥、壓力輥軸承采用耐高溫潤滑脂潤滑。
◆涂膠部采用自動循環供膠。
◆上下瓦楞輥采用48CrMo優質合金鋼,經過熱處理,硬度在HRC58° -60°表面經研磨。
◆涂膠輥表面經過網紋刻花及鍍鉻處理。
◆手動或電動隔膠裝置。
◆涂膠部停機可獨立運轉或不獨立運轉兩種方式。
◆SF320S design speed: 100m/min
◆Effective width: 1400mm-2200mm
◆Corrugated roller: Φ320mm/360mm
◆Driving gearbox adopts immersion lubrication to reduce noise, universal joint drive, isolated power source (optional).
◆The lifting and lowering of the upper tile roller, pressure roller and rubber coating roller are all pneumatically controlled.
◆The paper guide method adopts vacuum adsorption and air volume adjustment device to maintain the stability of the small corrugated type at high speed.
◆The bearings of the tile roller and pressure roller are lubricated with high temperature resistant grease.
◆Gluing department adopts automatic recycling glue supply.
◆The upper and lower corrugated rollers are made of 48CrMo high-quality alloy steel, after heat treatment, the hardness is HRC58°-60° and the surface is ground.
◆The surface of the rubber roller is treated with anilox engraving and chrome plating.
◆Manual or electric glue isolating device.
◆The gluing section can operate independently or not in two ways when it stops.
